Modbus to FF/PA Converter,support TTL Level, RS232,RS485

1.Modbus to FF, PA 2.TTL,RS232,RS485 3.round 66mm / square 80mm, may be customized 4.EMC certification

 Modbus to FF, PA, HART Converter,apply to TTL, RS232,RS485 transmitter  

NCS-MF105, MODBUS-FF Converter 

NCS-MF105 is a converter device for MODBUS-RTU protocol to FF protocol. It is able to integrate device/board with MODBUS communication interface to FF bus system. Bus power supply is selected by NCS-MF105, and NCS-MF105 can provide power supply to the boards the user provides.

As a MODBUS host, NCS-MF105 communicates with the device with MODBUS-RTU interface, it can achieve read/write operation for MODBUS register data via FF transducer blocks, and convert MODBUS data to FF communication system via FF standard AI,AO,DI,DO function blocks.

Features

Compliant with FF standard, provide FF communication ability to MODBUS device

Support Link Master function

Support AI, AO, DI, DO, PID function blocks

Support function blocks instantiation

Support standard DD or EDD specification

Electrical interface connected with MODBUS device supports TTL level, RS485 and RS232

Able to provide 3.3V or 5V power supply output

NCS-MF105 Application

Gas detector

Analyzer

Positioner

Any smart device with MODBUS protocol

Bus signal	IEC61158-2 physical layer standard
Bus power supply	9 ~ 32V
Operating temperature	-40 ~ 85°C
Static current	≤14mA
Humidity range	5% ~ 95%,non dew
Mechanism size	Dia 66 mm for TTL level 80*80mm for RS485 and RS232 (can be customized)

                                   

NCS-MP105,  MODBUS-PA Converter 

NCS-MP105 is a converter device for MODBUS-RTU protocol to PROFIBUS PA protocol. It is able to integrate device/board with MODBUS communication interface to PROFIBUS PA bus system. Bus power supply is selected by NCS-MP105, and NCS-MP105 can provide power supply to the boards the user provides.

As a MODBUS host, NCS-MP105 communicates with the device with MODBUS-RTU interface, it can achieve read/write operation for MODBUS register data via PA transducer blocks, and convert MODBUS data to PA communication system via PA standard AI,AO,DI,DO function blocks.

Features

Compliant with PROFIBUS PA standard, provide PROFIBUS PA communication ability to MODBUS device

Support PROFIBUS DPV1 and PROFIBUS PA 3.01

SupportAI ,AO,DI,DO standard function blocks

Support GSD5.0 and standard EDD

Support standard DD or EDD specification

Electrical interface connected with MODBUS device supports TTL level, RS485 and RS232

Able to provide 3.3V or 5V power supply output

Others refer to NCS-MF105

Modbus to FF/PA Converter,support TTL Level, RS232,RS485