Digital Signal to 4~20mA Analog Signal Converter,programmable transmitter

4 channels for 4~20mA analog signal programmable transmitter also provide 4-20mA to digital signal converter

Digital Signal to 4~20mA Analog Signal Converter

Brief Introduction

 

NCS-FI105 fieldbus to current Converter is used to convert fieldbus signals to conventional analog signals. It can receive fieldbus signals, and convert them to 4-channel 4~20mA analog signals. NCS-FI105 is the converter between fieldbus system and control valve/other actuator.

NCS-FI105 is an intelligent instrument and complies with FF Fieldbus Specification. It can be interlinked with several FF equipment. Abundant function blocks are integrated into NCS-FI105, and so it can complete not only the general measuring but also the complex controlling strategy. According to the requirement and actual application environment, the users can choose different function blocks to implement different function.

NCS-FI105 utilizes digital technology, which simplifies the interface between the control center and the field equipment. And so the expense of installing, running and maintenance can be reduced.

 

 

 

Configuration

 

NCS-FI105 transmitter can be configured by the Configurator software and NCS4000 DCS software of Microcyber Inc, NI-FBUS Configurator of National Instrument, and DeltaV system of Rosemount.

 

 

Priciple and Structure

Size of NCS-FI105

Technical Specification

1) Basic Parameters

 

Input signal	4~20mA
Channels	4 Channels
Current output	NPN collector output
Power supply	9 ~ 32 VDC ;Current Dissipation (static): ≤ 14mA
Fieldbus Signal	Communication Baudrate 31.25kbit/s, current-mode
Insulation	Between housing and terminal board: 500 Vrms (707 VDC)
Display	6 bits digital number and 5 bits characters LCD display (Optional)
Temperature range	- 40 ~ 85°C(No display) - 30 ~ 70°C(display)
Humidity Range	0% ~ 100% RH
Start Time	≤ 5s
Protection grade	IP 65
EMC	Designed to comply IEC 61000

 2) Technical Performance

Accuracy	< 0.05 %
Maximum load	1350Ω
Load power	9 ~ 32VDC Note:supply voltage ≥ (output current * load resistance + 5VDC)
Temperature effect	< ± 50 ppm/°C

3) Physical Performance

Electrical connection	1/2 - 14 NPT
Material of Construction	Aluminum
Weight	1.1kg

Digital Signal to 4~20mA Analog Signal Converter,programmable transmitter