Microcyber Corporation
Main products:pressure transmitter,temperature transmitter
Contact Us
  • Contact Person : Ms. Jin Guangshu
  • Company Name : Microcyber Corporation
  • Tel : 86-24-31217278
  • Fax : 86-24-31217279
  • Address : Liaoning,Shenyang,#1Building , 17-8 Wensu Street, Hunnan New District
  • Country/Region : China
  • Zip : 110179

LCD Display Pressure Transmitter

LCD Display Pressure Transmitter
Product Detailed
High accuracy: 0.075% Stability: 0.1% of maximum range per year

LCD Display Pressure Transmitter


Brief Introduction

As a new generation of smart fieldbus pressure transmitter, NCS-PT105II series pressure transmitter with capacitance sensor is available on FF H1, Profibus PA and HART protocols. The Transmitter has high accuracy, better reliability and intrinsically safety.


1.Excellent performance:

High accuracy: ±0.075%(20°C, range rate 10:1)

Stability: ±0.1% of maximum range per year

High range rate: 100:1

2.Multi sensor: differential pressure (SD), high static pressure (SH), gauge pressure (SG), absolute pressure (SA), micro differential pressure (SR)

3.Compensation: automatically environmental temperature compensation




Smart Transmitter Size (Unit: mm)


Transmitter Installation


The Connection of the HART Smart Transmitter


Basic Parameter

Measure object

Liquid, gas, stream


9~32V DC(FF,PA)

9~32V dc (FF, PA Explosion-proof instrument)

11.9~42 V DC (HART)

11.9~30 V DC (HART Explosion-proof instrument)


Analog: 2 wire 4~20mA

Digital: HART, FF and PA signal

Load resistant

0~1500ohm (common)

250~550ohm (with HART)


Input and output insulating voltage: 500Vrms (707VDC)


Optional 6 bits digital number or 5 bits characters LCD display

Temperature scale

Work temperature: -40 - 85°C (No display)

-30 - 70°C (display)

-30 - 60°C (Explosion-proof)

Store temperature:   -40 - 100°C (No display)

-40 - 85°C (display)

Allowed media temperature measured

-40 °C - 110 °C (Type name include ‘IC’)

-40 °C - 149 °C (silicone oil)

-40 °C - 204 °C (sylthlem800)

-18 °C - 204 °C (inert liquid)

-40 °C - 104 °C (others)

Humidity scale


Start time

≤ 5 seconds

Refresh time

0.2 seconds

Dump adjusting

Time constant 0-15 seconds

Change of cavity

< 0.16 cm3

Static pressure limit


Range 2: 1000psi (6.89MPa)


Range 3-8: 2000psi (13.8MPa)


Range 3-8: 2000psi (13.8MPa)

Range 9: 4500psi (31.0MPa)

Range 0: 7500psi (51.7MPa)


Range 4: 58psi (400kPa)

Range 5: 218psi (1500kPa)

Range 6: 435psi (3000kPa)


Range 4-7: 4500psi (31.0MPa)


Performance Index


For range 2

±0.1% of Span is for 0.5 URL≤Span ≤ URL;

±[0.05+0.025 ×(URL / Span)]% of Span is for Span<0.5 URL.

For other ranges

±0.075% of Span is for 0.1 URL≤Span ≤ URL;

±[0.025+0.005 ×(URL / Span)]% of Span is for Span<0.1 URL

Temperature effect

Total effects per 28°C(50°F)change:

For range 2

±[0.05% URL +0.25% Span]

For other ranges

Span≥0.1 URL: ±[0.019% URL +0.125% Span]

Span<0.1 URL: ±[0.025% URL +0.125% Span]

Long time stability

In 12 months, ±0.1% of maximum range

Static pressure effect

For range 2

±1% / 13.8MPa

For range 3

   ±0.5% / 13.8Mpa

For other ranges


Location installed effect

The maximum of the zero point movement is 0.24kPa

Power effect

< 0.005%/V of range calibrated


intrinsically safety Ex ia II C T4

Explosion-proof level

IP65 or IP67

Vibration effect

Meet GB/T 2423-1995

Electromagnetic compatibility

Meet GB/T 17626-1998 (IEC 61326-1:1997)


Physical Properties

Electrical connection

1/2-14NPT thread in.

Process connection

1/4-18 NPT thread in.

Drawing pressure connector

Range 2~5, distance of center is 2.122 inch (53.9mm)

Range 6, distance of center is 2.176 inch (55.3mm)

Range 7, distance of center is 2.197 inch (55.8mm)

Range 8, distance of center is 2.236 inch (56.8mm)

Range 9, distance of center is 2.260 inch (57.4mm)

Range 0, distance of center is 2.291 inch (58.2mm)

Structural materials

Isolated Membrane and exhaust/outlet valve: 316 stainless steel

Flange and connector: 316 stainless steel

O-ring: fluororubber

Filled liquid: silicon oil or fluorocarbon oil

Bolt: zinc plating carbon steel

(the material above should be selected at order, if has other requirement, please report in advance)

Housing: low copper of albronze

Coating: dion epoxy resin


Display type: 3.5kg

No display type: 3.3kg


LCD Display Pressure Transmitter

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.